Using Stage HDMI Connection
Grab the HDMI Cable, HDMI Transmitter, and the 3.5mm to XLR adapter (If audio is needed) from the drawer labeled “HDMI & 3.5 to XLR”
Connect HDMI:
Plug the HDMI cable into the transmitter.
Plug the transmitter into the Ethernet port in the stage pocket. - Note the port label on the stage pocket where you connected it (e.g., "N102").
Plug the HDMI cable into your device.
Patch Panel Connection:
Go to the patch panel in the equipment rack.
Find the matching port that corresponds to the label you noted from the stage pocket (e.g., "N102").
Plug in the Ethernet cable labeled “Stage HDMI” to that port.
The link & HDCP light on the transmitter should start flashing if plugged in correctly.
Make sure the Projector is powered on: Lantern Power On & Off - Order Of Operations
Press the HDMI switch under the desk if no signal appears.