Lantern Power On & Off - Order Of Operations
Must be done in exact order
Power On-
(Step 1-3 only needed if using camera/streaming system)
Plug in the Blackmagic Video Switcher
Flip on the power of the Canon Camera Controller
• Power switch on the rear right of the unit
Turn on PTZ
Press Settings on the bottom left of the screen
Video (Under Camera Section)
ALL CAMERAS
ON
Press ENTER at the bottom right of the screen
Press Close at the bottom right of the screen
Press Home at the bottom left of the screen
Lower Projector Screen with buttons labeled screen on the desk
Using remotes, turn on the Rear TV and the Projector
• Aim the remotes at each unit. You will hear a beep when the Projector powers on.
Turn on the Soundboard
• Remove the cover and press the button on the rear bottom right corner
Turn on the Audio Rack under the desk
• Use the labeled power switch
If using the stage HDMI Cord, refer to the guide here: Using Stage HDMI Connection
Turn on the Mac Studio
• Press the power button on the rear bottom left corner
If another program needs to be used on a Mac other than ProPresentor, press “ProPresentor” at the top left next to the Apple logo and hit “Quit ProPresentor.”
Power Off-
Shut down the Mac Studio
Press the Apple logo at the top left of the screen
Press shutdown
Click Ok on all pop-ups till the computer shuts down and the front LED turns off
Unplug the Blackmagic Video Switcher
Turn off PTZ
Press Settings on the bottom left of the screen
Video (Under Camera Section)
ALL CAMERAS
OFF
Press ENTER at the bottom right of the screen
Press Close at the bottom right of the screen
Press Home at the bottom left of the screen
Flip off the power of the Canon Camera Controller
• Power switch on the rear right of the unit
Using remotes, turn off the Rear TV and the Projector
• Aim the remotes at each unit. You will hear a beep when the Projector powers off.
Turn off the Audio Rack under the desk
• Use the labeled power switch
Turn Off the Soundboard
Press the processing button under the screen twice
Press the shutdown button on the screen
Press Yes
Wait till “It is now safe to turn off your sq” appears
Press the button on the rear bottom right corner
Put back on the dust cover