10. Planning without CT scan
10. Planning without CT scan
Blue Sky Plan® software also allows planning for cases without a CT scan – STL models only.
If a user plans a case without a CT scan, the imported models might not be oriented properly (the orientation does not match the head in the bottom left of the 3D view). This makes planning very difficult. For these cases, Blue Sky Plan has a model alignment dialog, which opens when selecting the planning type of the “Import models”. You can import one or several models. For alignment, it is necessary to select the primary model (ideally Maxilla) through which the alignment is done. The user also needs to specify if the model is a Dentated Arch or Edentulous Arch.

In the next step, the user marks three dots on the model to help the software align the models properly (to match the orientation of the BSP coordinate system). The rest of the models will be aligned relative to the alignment of the primary model.

In the last step, the user can manually fine-tune the primary model using the grid. If several models were imported, they will move together as a group.

Back to Content Page
Previous Page 9. STL model import (planning with CT scan)
Next Page 11. STL model adjustment